Are you an avid golf player thinking about creating your own putting green through a DIY putting green project?  A DIY putting green is the ideal place where golfer can engage in regular putting practice and hone his or her golfing skills.  It would certainly be wonderful for a golfer to have a beautiful putting green at their access whenever they desire to practice.  By owning your own putting green you can practice in complete privacy and with continual practice sessions improve upon your golfing game.  What’s more, if you engage in a DIY putting green project you will have the satisfaction of having created the putting green yourself once the project is completed.


Important DIY Putting Green Decisions

There are several decisions that the installer of a DIY putting green will have to make in order to get the project started.  Cost factors, the kind of DIY putting green desired, and the DIY putting green style must be considered before the project can begin.  The DIY putting green installer will also need to give careful consideration to where the DIY putting green will be located, how large it will be, and the surrounding landscape will have to be assessed for appropriateness. 

How the DIY putting green will be used is very important; the DIY putting green can be used for putting, but it can also be used for chipping at different distances.  The type of turf that one uses will depend upon the answers to the latter question.  There are different turfs suitable for different situations; the DIY putting green installer can select from nylon or Polypropylene turf, fringe line turf and tee line turf.  Along with turf considerations, the way the DIY putting green will be laid out is also important, and the type of based used, whether limestone or concrete will also need to be selected.  In addition, the DIY putting green installer may want to incorporate a bunker in the greens too; this may require additional planning and materials.

The DIY putting green should be situated in a location that is somewhat elevated to allow for proper drainage.  It is highly recommended that the DIY putting green installer plan to create a minor grade and a minor crown in the DIY putting green so that it drains appropriately at all times.  Where trees are located on the property must also be considered since the roots of the trees have the potential of disturbing the greens later on and causing serious destruction.  Once the appropriate spot has been assigned, the future installer can then mark out the DIY putting green location with field paint and begin measuring the spot for materials.


DIY Putting Greens and Materials

There is a wide range of equipment and materials that you will need to have on hand while you are creating a DIY putting green.  DIY putting greens are projects which will require the use of a industrial style carpet cutter, a chalk line, a drop spreader, a hammer, a rake, a riding roller and/or plate tamper, a shovel, a hose, a broom, and a wheel barrel.  The DIY putting green installer will also need to acquire turf, sleeves, cups, poles, flags, seaming materials, paint for field marking, and a good weed killer for the DIY putting green maintenance. 

Concrete or limestone will be needed in order to create the base of the DIY putting green.  The installer will also need to invest in some type of appropriate board for the cutting green; bricks, and blocks are the most suitable boarders for putting greens.  Polyurethane glue and mylar glue will need to be used to connect pieces of turf on the greens too.  In all, the installer can anticipate a running material cost of roughly $3000.00 or more.


DIY Putting Green Installation

To begin the DIY putting green project, the installer will need to prepare the landscape.  The ground will need to be shaped and smoothed over and when this portion of the project is completed the ground should match the contour desired for the DIY putting green.  After shaping the ground area, the installer will need to create the DIY putting green base with concrete or limestone.  If limestone is used, two different layers are required.  This base must be created to the same shape as the intended DIY putting green. 

Once the base is applied, if it is not of concrete, it can be flattened; if the base is of concrete it can be smoothed over until level after being poured.  Breaks must be added during this stage, and shaped into the limestone or concrete.  Cups are than installed wherever they are desired.  After the ground is fully prepared, the turf can be set up for the DIY putting green.  The industrial carpet cutting knife can be used to shape the turf to desired dimensions.  If the turf has to be pieced together this can be done through the use of polyurenthane glue or mylar tape.  The final step is to add seam fillings with a flex material/sand mixture, and the placement of a dressing on top of the green turf.  This will be then swept with a broom to make the turf strands stand upright; sweeping also aids in making the entire surface of the turf completely smooth and suitable for putting.


More Information about DIY Putting Greens

SYNLawn Golf™ offers a wealth of information related to DIY putting greens, DIY putting green installation, and DIY putting green landscaping.  SYNLawn Golf™ also specializes in selling the necessary turf for DIY putting greens, and there are complete articles detailing the necessary steps for installing a DIY putting green.  For more information visit:
http://www.puttinggreensdirect.com/index.html.

Residential Putting Green Magazine is another online resource for individuals interested in DIY putting green designs and options.  The site offers information about putting green maintenance, portable greens, buying advice, a complete putting green guide for the DIY project, tips for choosing a professional installer, a newsletter, a blog, different reviews, and a variety of articles related to indoor as well as outdoor DIY putting greens.  For more information, visit:
http:// www.residential-putting-green-magazine.com.